How to Configure a Linksys WRT300N

The Linksys WRT300N is both a wireless and broadband router WRT300N and supports the Windows home Server automatic router configuration. The unit includes the Wireless Access Point, a built-in 4-port full-duplex 10/100 Switch for all of the wired Ethernet items and a router that brings the whole network together and enables it to use the Internet connection.Here is the following steps which will help you to configure a linksys WRT300N router.
If you want reset linksys E1200 router then follow this blog- How to Reset Linksys E1200 Wireless N-Router,which i have discussed in same blog.

Step1: To find your router's IP address, click on "Start" and open "Run" or hold down the Windows key and strike "r." In the run box type "cmd" and click on "OK." type "ipconfig" in the next window and hit "Enter." This will bring up your local network information. The router is your gateway to the Internet, so the number listed for the gateway is the IP number of your router.

Step2: Put username and password if your router or modem requires it to get logged into the router. Click on "OK."

Step3: Click on the "Wireless" tab in the top bar of the next screen. Choose "Basic Wireless Setting" if it is not set by default. In "Wireless Network Mode," pick "Enable."

Step4: Pick a name for your network and enter it in "Wireless Network Name (SSID)." This will be what you look , when searching for the wireless connection. Click on "Save Settings."

Step5: Click on "Wireless Security." Choose "WPA" for security mode. This setting will allow you to pick your own password and work on the easiest way. For security setting more boxes will appear on screen. Put your password and after completing the all setting click 'Save Settings'
To know more about router admin password or how to set admin password in a linksys router then follow this article. How to Reset Admin Password in a Linksys Router.
If you are facing problem with your Linksys Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.

How to Troubleshoot a Belkin N150

The Belkin N150 router is basically used  for setting up a wireless network in a home or office. If you have trouble with the router, such as disconnections from the Internet, weak signals or installation problems, you can follow certain troubleshooting techniques to resolve the issues. Note that certain steps may require that you establish administrative rights on your computer.
If you want to block unwanted website on a belkin router then follow the article.How to Block Websites on a Belkin Router.

Step1: Unplug the router for 10 seconds and again plug in. Sometimes a simple restart can resolve network problems on a Belkin N150 router.

Step2: Disable the "Windows Firewall," which might be preventing an outgoing connection. Click the "Start" menu, type "Windows Firewall" and press "Enter." Click "Turn Windows Firewall on or off." Click on "Off." Click "OK."

Step3: Make sure the N150 router is connected properly to your modem with an Ethernet cable via the router's "WAN" port on the back.

Step4: Turn on "Broadcast SSID." Connect the router to your computer with a network cable. Open a Web browser and type "http://192.168.2.1" in the address bar. Click the "Channel and SSID" page. Click to turn "On" your "Broadcast SSID."

Step5: Limit the wireless transmission rate to improve range and connection stability. Click the "Start" menu and choose "Control Panel." Click "Network Connections." Double-click your wireless card's connection. Click the "Configure" button on the "General" tab of the dialog box. Click "Advanced." Select a lower transmission rate than the existing setting. Click "OK."

Step6: Contact your Internet service provider (ISP) if none of the above steps fixes a problem on your Belkin N150 router and request that a technician troubleshoot the malfunction.
If you want set Belkin N F5D8236-4 then follow my blog, How to Set Up a Belkin N F5D8236-4 Wireless Router,which i have discussed in same blog.

The above instructions are followed step by step.If you are getting any problem and need belkin tech support then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Reset Linksys E1200 Wireless N-Router

The E1200 Wireless-N Router from Linksys is a wireless router using Wireless-N technology to achieve data rates up to 300Mbps. The router includes four 10/100 Fast Ethernet LAN ports, and includes the standard WPA and WEP security features. The router is backwards compatible, allowing it to connect to devices using other wireless standards. The features of Linksys E1200 wireless N-router are-

• Fast Wireless Speed

• Reliable Wireless Coverage

• Advanced Security

• Quick To Install

• Easy To Manage

 Following steps will help you to reset your Linksys E1200 wireless N-router with default factory setting .If you want configure linksys WRT54G then follow my blog How to configure linksys WRT54G which I have discussed in same blog.  
Step1: open a web browser on a computer connected to your network, then type 192.168.1.1 and press enter. The router prompts you for a user name and password.  

Step2: Enter the user name and password, and then click OK. The utility’s main menu opens. If you set up your router without using Cisco Connect, your router’s default password is admin. (You can leave the user name blank.)  

Step3: Click the Administration tab, and then click the Factory Defaults page.  

Step4: Click Restore Factory Defaults. A confirmation window opens.  

Step5: In confirmation window ,click the button OK.
 If you want reset password in linksys wireless router then follow this article, How to Reset Password in Linksys Wireless Router.
If you are getting problem from above steps then or need proper Linksys routersupport then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Set a Firewall on a Belkin Wireless G Router

Firewall designed to protect your network computer from online threats .In belkin wireless G router, the firewall protects your network from basic attacks and also blocks hacker from outside access. You don't need to apply any special settings when you enable the Belkin firewall. When you enable it, the firewall automatically changes your ports in active mode and protects the network from attacks.
 If you want reset factory setting in belkin router then follow this article How to Reset a Belkin Router to Factory Settings.

Step1: Right-click on the Belkin Router Manager icon near the system clock in your system.

Step2: Scroll up the menu that appears and click on "Belkin Setup." The router setup window will open.

Step3: In router setup window, Click on "Advanced Tools" button.

Step4: Select "Firewall Settings" from the menu on the right side of the window.

Step5: Click on the "Enable" box and then click "Apply Changes." Your firewall is now set.

Belkin routers are an excellent resource for connecting your home network to the Internet. If you want set up belkin router then follow my blog ,How to Set Up a Belkin Router which i have discussed in same blog.
If you are facing problem with your Belkin Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.

How to Configure a Netgear WG302 Wireless Access Point

The Netgear ProSafe Wireless Access Point 802.11g WG302 is a basic component of a wireless local-area network. It mainly provides a connectivity link between wired networks and wireless devices in a home or small business. For many network applications, the wireless access point is simply a component that broadcasts a signal and receives data sent by the wireless devices on the network.
Netgear wireless router being one of the most popular wireless networking devices and if you want to configure a netgear wireless router then follow this article Step by Step Guide to Setup and Configure a Netgear Wireless Router.

Step1: If your system connected to the Netgear WG302 via Ethernet cable then type 192.168.0.228 in the address field of your Web browser and press Enter.

Step2: For login , type the user name as admin and password in the password field.

Step3: give an access-point name, and then click Apply. If your network requires that settings in the IP Address section be changed then do it. Select your time zone from the Time Zone dropdown list. When all changes have been made, click Apply before navigating away from this page.

Step4: Click Wireless Settings in the Basic section of the main menu. Open the dropdown list for Country/Region and then select the country in which the Netgear WG302 will be used. The settings in the Wireless LAN section can be left at default for most applications. If your network requires it, change these settings to allow proper functioning of the WG302. All wireless devices on your network must use the same network name (SSID) and channel. Click Apply before navigating away from this dialog.

Step5: Give the appropriate settings for wireless security mode in the WEP/WPA Settings dialog. All wireless devices on your network must use the same security encryption mode and the same key. Click Apply before navigating away from this dialog.

If you want to configure netgear firewall to protect from unauthorized access then follow this blog,How to Configure a NetGear Firewall, which i have discussed in same blog.

If you find difficulties to perform the  above task, consult an expert for solve the problem and reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.