How to Install a Linksys WAG200G

The Linksys WAG200G is a Wireless-G ADSL home gateway device that functions as both a wireless router and a DSL modem. The WAG200G features a line input and four Ethernet inputs in the back of the device. To install Linksys wag200g router follows the given steps:
If you want to reset admin password in linksys router then follow this article-How to Reset Admin Password in a Linksys Router.

Step1: Shut down all devices where you connect the Linksys WAG200G.

Step2: The WAG200G has a built-in DSL modem so, extra DSL modem is not necessary.

Step3: First, connect the yellow Ethernet cable included with the WAG200G to your computer's Ethernet port and connect the other end of the cable to one of the four ports on the back of the router/modem.

Step4: And then connect your DSL cable to the DSL port in the back of the WAG200G and connect the other end to the DSL wall jack.

Step5: Connect the AC adapter to the back of the WAG200G and plug it into the wall.

Step6: After completing the all above steps, turn on your computer.

Step7: Insert the setup CD packaged with the WAG200G router/modem into your computer's disc drive and follow the on-screen instructions to configure the device for first use.

Linksys WRT54G broadband router is one of the most popular consumer routers ,if you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G .

To get linksys tech support then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Secure Your Wireless Router

If you want set wireless router with connect your internet, in that case you should secure your wireless router. The router transmits and receives data from the modem and computers connected to the network. These steps will go a long way toward keeping your network and secure your wireless router.
Password protection in wireless network is also very important part.You can protect your wireless network using password.Follow this blog-How to Password Protect a Wireless Network?

Step1:  Connect your wireless router and open your Internet browser and enter the IP address assigned to your router. You should use proper IP address.

Step2: Log in to your router configuration by typing the username and password specified in your manual. For Linksys routers, leave the user name blank and type “admin” (without the quotes) in the password field and press enter. To change the password, simply click on the Password tab and enter your new password.

Step3: When you buy a wireless router, it comes with a default SSID that's the same for the thousands, or millions, of routers the manufacturer makes. Set your Service Set Identifier (SSID) by typing it into the box. This is the name of your wireless network. Make it a unique phrase; the default SSID is usually the name of the router manufacturer, such as Netgear or Belkin.

Step4: Set your wireless network's security protocol to WPA 2.0 -- Wi-Fi Protected Access. This encrypts any data sent over the network and allows access only to users who have the security key. Set your security key as something not easily guessed. A string of random numbers and letters is recommended. Be sure to record this security key in a safe place so you can recall it when adding a new device to your network or changing network security settings.

Most of the people across the world prefer to go for D-Link routers due to their easy setup and configuration .Setting your D-link router follow this article-Setting Up D-Link Routers

Note: If you are facing any problem on router then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Access the Router Settings on a NETGEAR Wireless-N 300

The NETGEAR Wireless-N 300 is a consumer-grade Wi-Fi router for distributing a fast broadband connection. Various types of features which are included for of net gear wireless parental control protection, WEP, WPA2-PSK and WPA-PSK password encryption options; four Ethernet connection ports and 802.11n/g/b wireless protocol compatibility. The NETGEAR Wireless-N 300 which is includes resource software for Windows, Macintosh, UNIX and Linux-based computer systems. The router's internal memory contains several user-configurable options which are accessible through a connected computer's Internet browser. Changing certain settings within the router may prove necessary for promoting security and proper network functionality.
Netgear DGND3300 wireless router allows you to have a high-speed Wi-Fi connection in your home or business.If you want to install this router then follow my blog, which i have discussed in same blog -How to Install a Wireless Netgear Router Model DGND3300

Step1: Turn on the computer and router then open your computer's Internet browser.

Step2: Type http://www.routerlogin.net into your web browser’s address bar.

Step3: Login page will appear. Enter the required user name and password. If you have not previously set up a unique user name and password for the router, enter "admin" in the user name field and "password" in the password field. Click on the "OK" button to enter the router settings menu.

If you want diagnose the netgear wireless connection then follow this article to get the steps-Steps to Diagnose Connection Problems in Netgear Wireless Router.

Note:If you are getting any problem on router setting (any router) ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Change the Security Settings on a Netgear Wireless Router

Netgear is a popular manufacturer of wireless routers; the settings on Netgear routers can be changed by logging in to the router with a Web browser. Netgear routers are very useful for home networking devices. If you want to change the security setting on a netgear router then you need to open a port to the internet or to change the WEP or WPA security key necessary to access the router and the network.
If you want to protect your wireless router and set password then follow my blog-How to Password Protect a Wireless Network, which i have discussed in same blog. 

Step1:  connect your computer with a local area connection to the router and open web browser window and enter the router’s local IP address. This IP address will be documented in the Netgear Router User Guide and on the installation CD. This will open a login page.

Step2: Enter the administrator's user ID and password in login fields.

Step3:  when you are logged in to the administration interface then from the Basic Settings page the IP address may be set as dynamic or static. Also, the MAC address and the Domain Servers are specified on this page.

Step4: To set wireless security for the router -- for example, to change the WEP key -- select "Wireless Settings" from the left navigation menu. On the Wireless Settings page, WEP may be enabled, disabled or specified with a preset key.

Step5: Next, create a Security Encryption Key. To do this, enter a word in the "Passphrase" field and click "Generate." The application will automatically generate four encryption keys.

Step6: Choose one of the generated keys for your encrypted passcode by clicking the radio button next to the option. Click "Apply" to save. The wireless security settings have now been specified.

Step7: To connect a computer to the network, enter the encryption key selected during this configuration.

If you want to setup your netgear router then follow this article-How to Setup Netgear Router.

Note:To get technical support on netgear router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Set Up Belkin Wireless Security

Belkin wireless router is basically used for setting up a wireless network in a home or office. Belkin router can connect with computer, gaming equipment and other Wi-Fi-enabled devices. Additional users on your wireless network can hack into your computer or cause the network to slow down. You set belkin router security to prevent unwanted users from accessing your wireless network.
You can also set firewall to protect belkin router from online threats.To set firewall setup follow my blog-How to Set a Firewall on a Belkin Wireless G Router.

Step1: open your web browser and types http://192.168.2.1 into web address filed on the browser and press enter.

Step2: It will open a new page and click on the login hyperlink at the top of the GUI home page. By default, Belkin routers do not have a password. Leave the password field blank and click on the "Submit" link to enter the GUI interface.

Step3: After completing the above steps click on the security hyperlink which is located under the "Wireless" menu.

Step4: Select 64Bit WEP or 128Bit WEP. If you want choose best wireless network then use 64bit

Step5: Select, "Key1" and enter in your new password. Click on the "Apply" hyperlink to save the router settings.

If you want to block unwanted website on a belkin router then follow this article-How to Block Websites on a Belkin Router.

Note: To get technical support on belkin router ,You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.