How to Install a Linksys WAG200G

The Linksys WAG200G is a Wireless-G ADSL home gateway device that functions as both a wireless router and a DSL modem. The WAG200G features a line input and four Ethernet inputs in the back of the device. To install Linksys wag200g router follows the given steps:
If you want to reset admin password in linksys router then follow this article-How to Reset Admin Password in a Linksys Router.

Step1: Shut down all devices where you connect the Linksys WAG200G.

Step2: The WAG200G has a built-in DSL modem so, extra DSL modem is not necessary.

Step3: First, connect the yellow Ethernet cable included with the WAG200G to your computer's Ethernet port and connect the other end of the cable to one of the four ports on the back of the router/modem.

Step4: And then connect your DSL cable to the DSL port in the back of the WAG200G and connect the other end to the DSL wall jack.

Step5: Connect the AC adapter to the back of the WAG200G and plug it into the wall.

Step6: After completing the all above steps, turn on your computer.

Step7: Insert the setup CD packaged with the WAG200G router/modem into your computer's disc drive and follow the on-screen instructions to configure the device for first use.

Linksys WRT54G broadband router is one of the most popular consumer routers ,if you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G .

To get linksys tech support then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Set up a Linksys Wireless Router

LinkSys is a brand of computer networking products. Producing routers both wired and wireless. LinkSys is by far the most ubiquitous router in use for home users and offices. It's not always easy to set up a wireless router with a Windows client. Linksys routers come with a step-by-step Setup Wizard which makes setup and configuration easy to understand.

Set up a Linksys Wireless Router

• Attach the antennas to the Linksys wireless router.

• Place the router in a central location, making sure it's not surrounded by metal. (A signal can't be obtained through metal.) The router should be located so that the distance between clients (computers) is somewhat equal. This will create a better connection.

• Plug the Ethernet cable into the "Internet" port on the back of the Linksys router.

• Connect a computer to the router by plugging another Ethernet cable into the Ethernet port on your computer and attaching the other end to one of the available ports on the back of the router. You can choose any port except the one labeled "WAN."

• Plug the router into an electrical outlet.

• Wait for the power light to stop flashing, at which time the router is finished booting up. While the router is booting, the power light will be blinking. This process may take a few minutes to complete.

• •Reboot your computer so it can access a new IP address from the router through the Dynamic Host Configuration Protocol (DHCP).

V tech-squad has a special shell for troubleshooting all your Linksys router-related problems including Wi-Fi setup, networking, security, and upgrade etc. If you are facing problem with your Linksys Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201 For US/CA.

Linksys Router Setup and Configuration

linksys router is one of commonly used for business and home use. This brand comes by Cisco and as well as number of model of of wireless routers comes like cable routers. DSL routers. It is a very simple easy to setup. You don’t need to take help from any engineer to to perform this easy tasks. LinkSys router setup is common design for almost same for all . Below the picture

Linksys Router Setup: The Basic Configuration

You need to Follow this instructions

First step you need to do router setting place in Linksys router in the middle location and you need to be careful always away from metal-surrounded environment

Connect the Ethernet cable into the Internet port on the behind of the linksys router. This port is generally placed at the Behind of the router.

Now your computer should be connected to the router and then you need connect one more Ethernet cable into the Ethernet port in your computer and attach the opposite end to one of the ports at the behind of the router.

To make effective change you need to restart your computer once you restart it will access a new ip address from the router.

Next Linksys Router Setup : Configure the Router

This address http://192.168.1.1/ you need to put in your internet browser then press Enter
You will be prompted to log in , you need to tpye in “Admin” in the username box and blank leave the password

Now you need to select internet connection type from the drop-down menu. decide “DHCP” for modems or “PPPoE” for most DSL modems.

it is recommended that you consider setting an SSID to discover the router as your own and configuring WEP to encrypt your traffic.

Set a service (SSID) to discover the router and then you need to change the password.