How to Install a Linksys WAG200G

The Linksys WAG200G is a Wireless-G ADSL home gateway device that functions as both a wireless router and a DSL modem. The WAG200G features a line input and four Ethernet inputs in the back of the device. To install Linksys wag200g router follows the given steps:
If you want to reset admin password in linksys router then follow this article-How to Reset Admin Password in a Linksys Router.

Step1: Shut down all devices where you connect the Linksys WAG200G.

Step2: The WAG200G has a built-in DSL modem so, extra DSL modem is not necessary.

Step3: First, connect the yellow Ethernet cable included with the WAG200G to your computer's Ethernet port and connect the other end of the cable to one of the four ports on the back of the router/modem.

Step4: And then connect your DSL cable to the DSL port in the back of the WAG200G and connect the other end to the DSL wall jack.

Step5: Connect the AC adapter to the back of the WAG200G and plug it into the wall.

Step6: After completing the all above steps, turn on your computer.

Step7: Insert the setup CD packaged with the WAG200G router/modem into your computer's disc drive and follow the on-screen instructions to configure the device for first use.

Linksys WRT54G broadband router is one of the most popular consumer routers ,if you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G .

To get linksys tech support then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Secure Your Wireless Router

If you want set wireless router with connect your internet, in that case you should secure your wireless router. The router transmits and receives data from the modem and computers connected to the network. These steps will go a long way toward keeping your network and secure your wireless router.
Password protection in wireless network is also very important part.You can protect your wireless network using password.Follow this blog-How to Password Protect a Wireless Network?

Step1:  Connect your wireless router and open your Internet browser and enter the IP address assigned to your router. You should use proper IP address.

Step2: Log in to your router configuration by typing the username and password specified in your manual. For Linksys routers, leave the user name blank and type “admin” (without the quotes) in the password field and press enter. To change the password, simply click on the Password tab and enter your new password.

Step3: When you buy a wireless router, it comes with a default SSID that's the same for the thousands, or millions, of routers the manufacturer makes. Set your Service Set Identifier (SSID) by typing it into the box. This is the name of your wireless network. Make it a unique phrase; the default SSID is usually the name of the router manufacturer, such as Netgear or Belkin.

Step4: Set your wireless network's security protocol to WPA 2.0 -- Wi-Fi Protected Access. This encrypts any data sent over the network and allows access only to users who have the security key. Set your security key as something not easily guessed. A string of random numbers and letters is recommended. Be sure to record this security key in a safe place so you can recall it when adding a new device to your network or changing network security settings.

Most of the people across the world prefer to go for D-Link routers due to their easy setup and configuration .Setting your D-link router follow this article-Setting Up D-Link Routers

Note: If you are facing any problem on router then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Access the Router Settings on a NETGEAR Wireless-N 300

The NETGEAR Wireless-N 300 is a consumer-grade Wi-Fi router for distributing a fast broadband connection. Various types of features which are included for of net gear wireless parental control protection, WEP, WPA2-PSK and WPA-PSK password encryption options; four Ethernet connection ports and 802.11n/g/b wireless protocol compatibility. The NETGEAR Wireless-N 300 which is includes resource software for Windows, Macintosh, UNIX and Linux-based computer systems. The router's internal memory contains several user-configurable options which are accessible through a connected computer's Internet browser. Changing certain settings within the router may prove necessary for promoting security and proper network functionality.
Netgear DGND3300 wireless router allows you to have a high-speed Wi-Fi connection in your home or business.If you want to install this router then follow my blog, which i have discussed in same blog -How to Install a Wireless Netgear Router Model DGND3300

Step1: Turn on the computer and router then open your computer's Internet browser.

Step2: Type http://www.routerlogin.net into your web browser’s address bar.

Step3: Login page will appear. Enter the required user name and password. If you have not previously set up a unique user name and password for the router, enter "admin" in the user name field and "password" in the password field. Click on the "OK" button to enter the router settings menu.

If you want diagnose the netgear wireless connection then follow this article to get the steps-Steps to Diagnose Connection Problems in Netgear Wireless Router.

Note:If you are getting any problem on router setting (any router) ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Change the Security Settings on a Netgear Wireless Router

Netgear is a popular manufacturer of wireless routers; the settings on Netgear routers can be changed by logging in to the router with a Web browser. Netgear routers are very useful for home networking devices. If you want to change the security setting on a netgear router then you need to open a port to the internet or to change the WEP or WPA security key necessary to access the router and the network.
If you want to protect your wireless router and set password then follow my blog-How to Password Protect a Wireless Network, which i have discussed in same blog. 

Step1:  connect your computer with a local area connection to the router and open web browser window and enter the router’s local IP address. This IP address will be documented in the Netgear Router User Guide and on the installation CD. This will open a login page.

Step2: Enter the administrator's user ID and password in login fields.

Step3:  when you are logged in to the administration interface then from the Basic Settings page the IP address may be set as dynamic or static. Also, the MAC address and the Domain Servers are specified on this page.

Step4: To set wireless security for the router -- for example, to change the WEP key -- select "Wireless Settings" from the left navigation menu. On the Wireless Settings page, WEP may be enabled, disabled or specified with a preset key.

Step5: Next, create a Security Encryption Key. To do this, enter a word in the "Passphrase" field and click "Generate." The application will automatically generate four encryption keys.

Step6: Choose one of the generated keys for your encrypted passcode by clicking the radio button next to the option. Click "Apply" to save. The wireless security settings have now been specified.

Step7: To connect a computer to the network, enter the encryption key selected during this configuration.

If you want to setup your netgear router then follow this article-How to Setup Netgear Router.

Note:To get technical support on netgear router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Set Up Belkin Wireless Security

Belkin wireless router is basically used for setting up a wireless network in a home or office. Belkin router can connect with computer, gaming equipment and other Wi-Fi-enabled devices. Additional users on your wireless network can hack into your computer or cause the network to slow down. You set belkin router security to prevent unwanted users from accessing your wireless network.
You can also set firewall to protect belkin router from online threats.To set firewall setup follow my blog-How to Set a Firewall on a Belkin Wireless G Router.

Step1: open your web browser and types http://192.168.2.1 into web address filed on the browser and press enter.

Step2: It will open a new page and click on the login hyperlink at the top of the GUI home page. By default, Belkin routers do not have a password. Leave the password field blank and click on the "Submit" link to enter the GUI interface.

Step3: After completing the above steps click on the security hyperlink which is located under the "Wireless" menu.

Step4: Select 64Bit WEP or 128Bit WEP. If you want choose best wireless network then use 64bit

Step5: Select, "Key1" and enter in your new password. Click on the "Apply" hyperlink to save the router settings.

If you want to block unwanted website on a belkin router then follow this article-How to Block Websites on a Belkin Router.

Note: To get technical support on belkin router ,You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.

How to Set Up a linksys WRT54GS Router

The WRT54GS wireless router is a model of the WRT54G Linksys router that is used in mainly home and consumer environments. You want share your internet connection with multiple computer using this type router then follow the given setup process. When the router will attach with your DSL line, you can connect your computers to the router.

If you want to setup linksys WRT54G2 wireless router with Comcast then follow my blog -How to Setup Linksys WRT54G2 Wireless Router with Comcast , which i have discussed in same blog.

Step1: Connect your computer to the router via Ethernet cable. Then turn on your computer and open your web browser put 192.168.2.1 in the address bar of your browser .It will access the router control panel.

Step2: Type admin for the password of the router, click ok and then click on setup then basic setup.

Step3: Select a static IP or a dynamic IP, depending on your particular network configuration.

Step4: Click on the save setting then go to the wireless section and then click on wireless settings.

Step5: Select the wireless mode which you want, along with what SSID you want for your wireless network.

Step6: Click on the save setting and to choose security mode and setup a password, go to the wireless security section. Your set up password will be useful when you logon to the wireless network on the router.

Step7: Click on the save setting to connect the router to your internet modem and then restart the router to complete the setup and setup an internet connection to the router.

If you want reset the linksys router password then follow this article-How to Reset Password in Linksys Wireless Router.

Note:To solve any problem on linksys router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201 .

How to Block Websites on a Belkin Router

If you want to avoid particular website then you can block this website on a belkin router. If you have own belkin wireless internet router then you can easily block this sites. Follow the given instruction to block website on a belkin router.
Firewall can easily protect your network computer from online threats .If you want to set firewall with your belkin wireless g router then follow my blog-How to Set a Firewall on a Belkin Wireless G Router,which i have discussed in same blog.

Step1: open your web browser and put the address “192.168.2.1” in address filed and press enter.Login page will appear.

Step2: Enter your user name and password to access the router configuration utility. If you have never changed the password, enter nothing in the password box and click "Submit."

Step3: Click on the "Parental Control" on the left side of the screen. Note that you must have a subscription in order to use this service, but most Belkin routers include a six-month free trial. Enter your email address and password to log into the parental control menu.

Step4: Click on the "Modify" button and then click the "Overrides" tab.

Step5: Enter the name of the website that you wish to block. Use the menu to select "Always blocked." Save and exit the configuration. The website that you entered will now always be inaccessible, unless the parental control manager password is entered.

If you want to set default factory setting in belkin router then follow this article- How to Reset a Belkin Router to Factory Settings.

See more:How to Block Websites on Netgear Router

Note:To solve belkin router problems ,You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.

How to Setup Linksys WRT54G2 Wireless Router with Comcast

Set up your Linksys WRT54G2 router to your Comcast cable Internet service to create a network for your wireless-enabled devices. The WRT54G2 uses the wireless-G protocol that supports transfer rates of up to 54 Mbps. The router is compatible with older wireless standards, so you don't have to upgrade older equipment to establish a connection with the signal. Follow the given steps to setup Linksys wrt54g2 wireless router with Comcast.
If you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G.

Step 1: Connect your computer to one of the Ethernet ports on the router and open a Web browser. Type "192.128.1.1" into the address field and press Enter.

Step 2: If the IP address 192.168.1.1 does not work, do the following:
In Windows XP, from Start, choose “Run” and type in: cmd then hit Ok, and black DOS window will open. If using Vista, from Start, just type in: cmd in the box.

From the DOS black window, type in: ipconfig and press Enter key. It will show up a list of stuffs and under the “Ethernet adapter local area network” you will see: “IP address”, “Default Gateway”. Copy down the default gateway and enter this number into the web browser like we did using 192.168.1.1

Step 3: Once we are connected to the router, it will prompt you with username and password. The default Linksys router username is blank (leave it empty), password is “admin” all lowercase without the code.

Step 4: Inside the router settings, go into the Basic Setup, and choose “Automatic Configuration – DHCP” from the Internet Connection Type. Click Save Settings.

Step 5: Go to Mac Address Clone section, choose “Enable” and save the settings.

Step 6: Open web browser and try to get online, if still not connected, turn off both the cable modem and the router wait about 30 sec, then turn on the cable modem first, and turn on the router next. If it still not working, turn them off for couples minutes and turn back on.
If you want to reset password in linksys router then follow this article-How to Reset Password in Linksys Wireless Router.
To get technical support on linksys router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.
 

How to Configure a Netgear DG834GT

The Netgear DG834GT wireless routers support the both Wireless-G and Wireless-B standards. This router plugs into your existing Internet connection and creates a personal wireless network and shares your Internet connection among multiple wireless hardware devices and even supports plugging other wired computers into the local network, such as desktop computers. Following given steps will help you to configure a netgear DG834GT router.

If you want to configure your Netgear WGR614 v6 router then follow my blog- How to Configure Netgear WGR614 v6.

Step1: Open your web browser and type "192.168.0.1" into your web browser address box and press enter.

Step2:  when login page will appear then type admin as a user name and put your password into password box and press enter. Your default password is ‘password’.

Step3: Complete the "Setup Wizard." Click the "Country" box and click your country in the list, then click "Yes" under "Auto-Detect Connection Type" and click "Next."

Step4: Type the username and password your Internet service provider gave you into the "Username" and "Password" boxes, if the wizard prompts you for them, and click "Apply."

Step5: Type the Internet connection information from your Internet service provider into the "IP Static Address," "IP Subnet Mask," "Gateway IP Address," "Primary DNS" and "Secondary DNS" boxes, if prompted, and click "Apply."

Step6: Configure the Netgear router's wireless network by clicking "Wireless Settings" on the router's configuration page. Type a name for your wireless network in the "Name (SSID)" box and enable the wireless network by clicking "Enable Wireless Access point."

Step7: Secure your wireless network by clicking "WEP" under "Security Options." Type a password for your wireless network into the "Passphrase" box under "WEP Key" and click "Apply."

Step8: Change the router's configuration password by clicking "Maintenance" and "Set Password." Type the current password, "password" by default, type into the "Old Password" box, type a new password into the "New Password" and "Repeat New Password" boxes and click "Apply.

If you want to block unwanted website in netgear router then follow this article-Netgear Router - How to Block Unwanted Websites.
To get online technical support on netgear router then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201 .

How to Install a Wireless Netgear Router Model DGND3300

The Netgear DGND3300 wireless router allows you to have a high-speed Wi-Fi connection in your home or business. The router includes a built-in DSL modem, parental controls and shared storage that users can connect to an external USB flash drive to use over the internet. The router also allows for greater bandwidth for high –quality media streaming and better online gaming. Follow a few simple steps to install the Netgear modem router.
If you want to block unwanted website in your router then follow this article-Netgear Router - How to Block Unwanted Websites.

Step1: Connect an ASDL filter to each phone that is using the same line. This filters out high-frequency noise on your phone caused by the modem router. Use a two-line filter with a splitter to share the connection with a phone or fax machine, and connect the phone into one slot and the modem into the other.

Step2: Connect the Ethernet cable from the LAN port on the modem to the computer's Ethernet adapter. Plug the router's power adapter into an electrical outlet.

Step3: Check the status lights on your router. The router's power light is a solid green and the ASDL link light, LAN light and both G and N-band lights are lit when it is connected properly.

Step4: Open your Web browser and type "192.68.0.1". Log in using "admin" for the user name and "password" for the password in lowercase letters. And follow the next step.

Step5: Click on "Setup Wizard" in the left pane of the menu. Select your country, and language from a drop-down menu then click "Yes" to have the wizard automatically check your Internet connection. Click "Next" and the Setup Wizard will walk you through the configuration of your router. Click "Apply" when finished.

If you want to connect netgearWNR3500 router then follow my blog- How to Connect to a Netgear WNR3500,which i have discussed in same blog.

Note:If you are getting any problem from above steps then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

How to Connect to a Netgear WNR3500

The Netgear WNR3500 is a router that allows you to connect wireless devices such as laptops, cell phones and multimedia players to the Internet and also helpful for wired connection. The WNR3500 from Netgear is a wireless-N router that includes a four-port Ethernet switch and support for 802.11 b/g and 802.11 n wireless protocols. A wired connection to the router is plug-and-play, but connecting wirelessly will require you to enter your network's SSID (service set identifier) and passkey if you have wireless security enabled.
If you want to block unwanted websites in netgear router then follow this article-Netgear Router - How to Block Unwanted Websites.

Wired connection:

Step1: Check the router's status. Confirmed router is turned on and that the Internet port on the back of the router is connected to your modem.

Step2: Plug in an Ethernet cable to one of the four Ethernet ports on the back of the router.

Step3: Plug the other end of the Ethernet cable into the Ethernet port on your computer or other Internet device.

Step4: Repeat this process to connect up to four wired devices.

Wireless connection: 

Step1: Check the "Wireless" LED on the router to ensure that it is lit. If it is not, navigate to www.routerlogin.com on your computer and start the Smart Wizard Setup to configure your wireless network. If you are prompted to log in, enter "admin" as the username and "password" as the password.

Step2: Turn on your wireless Internet device and search for wireless networks. Consult your device's user manual for specific instructions on how to do this.

Step3: Find and select the SSID network name that corresponds to your wireless network.

Step4: Enter the passkey for your network if you have security enabled.

If you have netgear DG834G model and you want to configure this model then follow my blog-How to Configure NetGear DG834G.
If you are not able  to connect your netgear router from above steps, to solve this problem you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.