Linksys Router Setup and Configuration

linksys router is one of commonly used for business and home use. This brand comes by Cisco and as well as number of model of of wireless routers comes like cable routers. DSL routers. It is a very simple easy to setup. You don’t need to take help from any engineer to to perform this easy tasks. LinkSys router setup is common design for almost same for all . Below the picture

Linksys Router Setup: The Basic Configuration

You need to Follow this instructions

First step you need to do router setting place in Linksys router in the middle location and you need to be careful always away from metal-surrounded environment

Connect the Ethernet cable into the Internet port on the behind of the linksys router. This port is generally placed at the Behind of the router.

Now your computer should be connected to the router and then you need connect one more Ethernet cable into the Ethernet port in your computer and attach the opposite end to one of the ports at the behind of the router.

To make effective change you need to restart your computer once you restart it will access a new ip address from the router.

Next Linksys Router Setup : Configure the Router

This address http://192.168.1.1/ you need to put in your internet browser then press Enter
You will be prompted to log in , you need to tpye in “Admin” in the username box and blank leave the password

Now you need to select internet connection type from the drop-down menu. decide “DHCP” for modems or “PPPoE” for most DSL modems.

it is recommended that you consider setting an SSID to discover the router as your own and configuring WEP to encrypt your traffic.

Set a service (SSID) to discover the router and then you need to change the password.