How to Reboot a Netgear DG834G Router

In Netgear router, when you change the router configuration, it does a “soft reboot”, which is related to the operating system reboot. On the other hand, hard reboot is typically used when you troubleshoot networking problems or when you need to reset the admin password. A “hard reboot” is usually done by removing power from the router and rebooting it after powering it off for several seconds. Follow the given steps to reboot your Netgear router.

If you want to setup netgear wireless router , follow this article-How to Setup Netgear Router

Step1: Open a web browser and type "192.168.0.1" into the address bar.

Step2: When login page will open, login using username name and password.

Step3: The ADSL Modem Wireless Router has a diagnostics feature. You can use the Diagnostics menu to reboot the modem router. Click the Diagnostics option which is under the Maintenance on the left hand side of your Netgear setting page.

Step4: Then click the Reboot button and it will automatically reboot your router.

***Reboot process can vary depending on different Netgear wireless router models.

Note: If you are facing problem with your Netgear Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201.  


See also: How to Reset Netgear Router
                 How to Secure Your Wireless Router

How to Reset Password on a D-link Wi-Fi Router

D-Link wireless router can connect multiple desktops or laptops to a single Internet connection. Besides, the router lets you customize your router settings to add or remove a computer from your network or enhance the signal strength of your wireless network. This all can be done by logging in to your D-link wireless router. If you forget or lose the router password, you need to reset the router to default factory settings. After reset, you can change the router password. To reset D-link router password, follow the given steps.

Step1: Press the Reset button for 10 seconds, then you can access the default username and password in your router.

Step2: Open a web browser and type "192.168.0.1" into the address bar.

Step3: When login page will open, type “admin" as the user name and leave the password field blank. This is the default information for D-Link routers. When you hold the Reset button down, it resets the administrator password to blank.

Step4: Once you access the Web configuration screen, click “Setup” in the top menu. And select the “Wireless Settings” link on the left-hand side.

Step5: After that click on the “Manual Wireless Connection Setup” button.

Step6: Scroll down to the field representing my “Pre-Shared Key”. If you don’t see it, select a security mode from the dropdown menu at the bottom of the screen first.

Step7: Type a new password.

*** Wireless setting options may vary depending on different wireless router models.

Note: If you are facing any problem on router then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

See also: How to Secure Your Wireless Router
                  How to Password Protect a Wireless Network?

 

How to Change Channel Settings in Your Wireless Router?

The wireless channel determines the frequency on which your router operates. For Improving a wireless connection strength or signal, you need to set your wireless router to a proper channel. Sometimes using the same wireless channel as your neighbors can slow your wireless connection or cause it to drop. To fix this problem, you can change the channel number of your router. Follow the given steps to change the channel settings.
If you want to block unwanted website on your router then follow this article -Netgear Router - How to Block Unwanted Websites

Step1: Open your web browser, type 192.168.0.1 in the address bar and press Enter.

Step2: In the login box, enter the username and password for your wireless router.

Step3: Select Wireless Settings from the menu. And go to the Channel drop-down menu and select a number that you want your wireless connection to operate on. You can also select Auto mode for automatic selection.

Step4: After completing the all above steps, click “Save Settings”.

Step5: Turn off your router and back on again to check signal strength.

Note: Wireless setting options may vary depending on different wireless router models.

See also: How to Access Wireless Router Settings
                  Most common router problems & their solutions

How to Enable the WEP Wireless Security

Wireless security should be used on every home network. It is also important for keeping hackers and other people who want to steal your information away from your wireless network. To make your wireless network secure, wireless routers use two types of encryption techniques viz. WEP and WPA. Using a WEP key, you can enhance the security of your wireless network. Follow the given steps to enable the WEP wireless security.

Step1: Open your web browser and type http://192.168.1.1 into the address box and press the Enter key. Though most of the wireless routers use this IP address, however it may differ brand to brand. You should refer to your wireless router setup manual for more information about the IP address.

Step2: When login page opens up, type the username and password for your wireless router. Depending on your router brand, you may have “admin" and “password” as the respective default username and password. But again, you must refer to your wireless router support manual.

Step3: Once logged in, click “Wireless Security" and Select "WEP" as the security encryption type.   

Step4:  Set the default transmit key to "1."

Step5: Type in a passphrase and click "Generate". This generates random passkeys.

Step6: Note down your network's SSID (listed on the security page) and the first WEP key. This is the information that you will need when trying to allow new connection through the wireless network.

See also: How to Access Wireless Router Settings
                 How to Get Online Technical Support for a Netgear Router

How to disable the Netgear firewall

A firewall blocks unauthorized access from the internet and protect your system from external threats.Most routers and modem already come with a firewall Netgear routers also usually come equipped with firewalls to provide extra protection for computer applications. But sometimes you cannot open some sites, because they are automatically blocked by the Netgear firewall. For this reasons it is sometimes necessary to stop Netgear firewall. Here are simple steps that you can follow to disable Netgear firewall.
If you want to configure the netgear firewall then follow this blog-How to Configure a Netgear Firewall

Step1: Open your Internet browser.

Step2: Type "192.168.0.1" into the address bar of your browser. Then Press "Enter" on your keyboard. It will open Netgear router configuration panel.

Step3:  Type your username and password in the appropriate fields for login the panel.

Step4: Select the "Security" option from the navigation menu. And click "Firewall Rules."

Step5: Select the option to "Add" a new rule for inbound traffic.

Step6: Next you will need to input the term “Any” on the section labeled “Inbound Services”. An “Action” drop down box will appear on which you will need to select “Allow always” and then click on “Enabled” to enable it. This will save the new firewall rule settings that you just entered.

These are the simple steps to stop the firewall on the Netgear router. The above mentioned steps and process may differ slightly depending upon the model of router being used.

If you want to block unwanted website on netgear router then follow this blog-How to Block Websites on Netgear Router

You can also see: How to Get Online Technical Support for Netgear Router Issues
                                How to Setup Netgear Router

 

How to Use Netgear WPN824

The Netgear WPN824 router provides connection for multiple computers connected to the Internet through an external broadband access device (such as a cable modem or DSL modem). Netgear WPN824 router has web content filtering options, plus browsing activity reporting and instant alerts via e-mail.
Before you begin using the network connection, you will need to install Netgear WPN824 router. To use WPN824 router, simply enable your computer’s wireless adapter, open your internet browser and connect to the internet. Follow the given steps to use Netgear WPN824 router.

If you want to block unwanted websites in netgear router then follow this article-Netgear Router - How to Block Unwanted Websites

Step1: First, connect your computer directly to your modem to verify your internet connection. After the verification, disconnect your computer from the modem.

Step2: Connect your router with your modem by connecting your Ethernet cable into the internet port on the back of your router. And also connect an Ethernet cable between the computer and one of the four LAN ports on the WPN824.

Step3: Turn on your wireless internet adapter in your computer and check the local wireless signals to verify the WPN824 is broadcasting.

Step4: Open your browser and type "192.168.1.1." into the address bar of your web browser.

Step5: When "Enter Network Password" page opens up, enter "Admin" and "Password,” in the "User Name" and "Password" fields.

Step6: Click "Wireless Settings" from the left menu.

Step7: You can change the “Name (SSID)” to the wireless name of your choice .Click on a wireless security type under security option.

Step8: Enter the wireless security key and then click “Apply”.

A NetGear DG834G is a most popular netgear wireless router.To configure Netgear DG834G router,follow my blog-How to Configure NetGear DG834G

Note:To get technical support on netgear router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.  

How to Set Up a Westell 7500 Modem Router

   
The Westell 7500 modem router delivers Internet access over both wired and wireless connections for digital subscriber (DSL) line service. Westell 7500 offers effective, high speed internet access in your pre-existing smaller workplace line and is also effective at data file levels, which are numerous times faster than the usual standard analogue cable box. You can connect your Westell router to create a network in your home or business. You can also connect your printer to this device so that you can share it among other computers.

Step1: Find the input panel on the side of the Westell router.

Step2: Insert one end of the phone line that runs from your wall jack to the DSL port on the side of the Westell router.

Step3:  insert the power cord for the router into the wall outlet and connect it to the power source port on the side of the router. The power, DSL and Internet lights will illuminate once the connection is made. The Westell 7500 Modem Router is now set up.

Step4: Click the "Wireless Connection" or "Network Connection" icon in the Windows system tray in the taskbar. This icon displays a wireless network connection.

Step5: Select the wireless network associated with the Westell router and click "Connect."

Note: If you are facing any problem on router then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.
 
See also: Setting Up D-Link Routers
                 How to Secure Your Wireless Router

How to Fix a Wi-Fi Connection

Wi-Fi connection can create problems for various reasons like incorrect browser settings, errors in cable connection, misplaced passwords or a modem requiring reset. You can manually check your Wi-Fi connection. To fix this problem, follow the given steps:

Step1: check your web browser and activate the “Work Offline” option. To get this option, go to the “File” tab in your web browser and click the “Work Offline” option to uncheck it.

Step2: Make sure your Ethernet cable is properly connected with your broadband modem and your wireless router. If this cable is loose at either connection point, you must tighten it before hoping to attain your Wi-Fi signal again.

Step3: Press the "Reset" button that is located on the front face, top or rear of the broadband modem. This button allows your modem to re-initialize, and this may solve your problem once it boots back up.

Step4: Enter your web address into your web browser and navigate to the page. A dialog box will appear that asks for a password, so enter the password from the manual.

Step5: Log in using default username and password. You can now change the password for security purpose(see also:How to Reset Admin Password in a Linksys Router).

Step6:  Choose a security encryption and a new password to replace the old one. Make sure that you have "WPA" encryption selected. WPA is a superior encryption technique than "WEP" and should always be selected. Anytime hackers may try to access your connection and steal your bandwidth, so do not make the password too simple and easy to ascertain.

Step7: Test your Wi-Fi connection again. It should now be fixed.

See Also: Setting Up D-Link Routers
                 How to Lock a Linksys Wi-Fi Router

How to Access Wireless Router Settings

Wireless router settings allow you to make changes to your network configuration and also provide better network security. You can access your wireless router setting using any internet browser while you are connected to your router network. Changing your router settings is not a very difficult task but you need to know how to access them. Follow the given steps to access your wireless router settings.

Step1: First, connect your computer to the router using the Ethernet cable, although you can connect over Wi-Fi, it is better to connect using the network cable. Plug the cable into the appropriate Ethernet jack on your computer. And plug the other end of the cable into any one of the four Ethernet ports on the back of your wireless router.

Step2: Open your web browser and enter the IP address of the wireless router into the URL address field. Normally, the default IP address for most of the routers is “192.168.1.1”. Refer to your wireless router support manual for the correct IP addressed and login details.

Step3:  When login page will appear, enter the username and password that came with your original wireless router setup manual. If you don’t have this information, contact your wireless router manufacturer or visit its website.

Step4: After login, you can see your wireless router settings. You can configure your network ports, as well as the SSID (wireless network name) and passwords.

If you want to reset the Linksys router password, follow this blog-How to Reset a LinkSys Router Password.

 

How to check your computer is wireless-enabled or not

Wireless connection allows you to connect your desktop and laptop computers to a wireless network for browsing the internet or sharing files or folders from any part of your home or office. Before connecting to a wireless network, you'll first need to make sure that your computer is wireless-enabled. If you're using Microsoft Windows, you can determine your computer’s wireless abilities using the below easy-to-follow steps.

Step1: Click on the Start button.

Step2: Right-click on "My Computer" and the select "Properties."

Step3: In Properties Window, Click on the "Hardware" tab.

Step4: Click on the Device Manager button (Windows XP) and check the installed hardware until you see Network Adapters. Make sure that you are logged on with admin privileges to access Device Manager.
For Windows 7 or Vista, click the Start button and type ‘devmgmt.msc’ in the Start Search box. Hit the Enter key. If prompted, enter your admin password and click Continue.

Step5: Click the "+" symbol next to Network Adapters to expand the section.

Step6: Find a hardware device that is named as "wireless" or "802.11" (for example, Broadcom 802.11g Network Adapter). If you see such a device listed under Network Adapters, it means your computer is wireless-enabled. If you don't see a similar device name, your computer may not have wireless capabilities.

Note: If your computer doesn't have built in wireless capabilities, you will need to install a wireless adapter.

Password protection in wireless network is also very important part.You can protect your wireless network using password.Follow this blog-How to Password Protect a Wireless Network?

If you find any difficulties to perform the above task, consult an expert to solve your wireless network problem ,you can  reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.